Lawn sprinkler system installation

Using bubblers and micro irrigation you can get real specific with your watering. This will help you to save water and time with your new lawn sprinkler system. With flood bubblers, you can irrigate roots and plants that are planted below ground. Since the water comes out of these sprinklers at a low pressure, they do not mess up your lawn or flower beds.

This is especially useful for those who have specific landscaping plans to protect their lawns and gardens. The soil in Virginia Beach, VA varies from sandy to clay. This will determine how well your new lawn sprinkler system works and if you need to increase watering or not. Sandy soil requires less water to keep the grass green and healthy. Clay on the other hand , holds moisture and releases it slowly.

Make sure that you have the correct amount of water pressure coming out of your lawn sprinkler system so that the soil can properly absorb it while keeping nitrogen levels in check. The size of most yards in Virginia Beach and Chesapeake area homes average about 9, square feet. If your lawn is bigger than the average size, you will need more sprinkler heads and zones in order for all areas of the yard to receive an adequate amount of water.

The bigger the yard, the more water you will need to use. This is because the further a sprinkler head is from its adjacent sprinkler heads, the less efficient it becomes. When installing your new lawn sprinkler system keep in mind that you will have to purchase an adequate amount of head and zone stations to make sure there are no dead spots or uneven watering in the yard.

If you are looking for help with designing a new lawn sprinkler system or installing one, contact Inlet Irrigation today. We will make sure that your irrigation system is as water efficient and practical as possible so that you can relax and enjoy your lush green lawn. After you have a scaled top view drawing of your property you can start to visualize the final product.

The top view drawing will allow you to plan out your zones and where you are going to place them. You also want to make sure that any angled areas in your property are accounted for during the pre-visualization process. At Inlet irrigation we make good use of our drawings and get as much input from the customer before we start any lawn sprinkler system installations. It is important to visualize the layout of your new lawn sprinkler system, as this will give you a better idea of what you are getting into.

Sprinkler zones allow you to break up your watering into sections. These sections are smaller than a regular watering zone and can be broken up even more. This allows you to water specific areas of your landscape. You may have certain plants or trees that require more water than others, or you could just want to make sure that a certain area always has enough water.

Depending on the size of your property and your watering requirements will determine how many sprinkler zones you need. The final design before installation will be a set of detailed drawings including the sprinkler system layout, irrigation design and more.

These details are known as the sprinkler system plan drawing. The final plan drawing is usually made in CAD or similar drawing software, but you can also ask for it to be done by hand on graph paper.

Chat with a sprinkler installation company to figure out which system is best for your lawn, yard or garden. You should always chat with a real estate expert to determine which home projects are worth investing in when it comes time to sell your home. If you install a new sprinkler system, potential buyers may recognize it will save them time and money, as it eliminates the need for them to move a sprinkler around the yard while cutting down on the water bill.

Sprinkler heads last about years, according to the International Association of Certified Home Inspectors. Repairing and spot-fixing your sprinklers are highly recommended in most cases, though at a certain point, your entire system may need replacing.

And ask the professional to give you cost estimates for repairing your system vs. Many sprinkler systems are installed within a single day, while others may take several weeks. This work includes the trenching, tubing, installation of sprinkler heads, tying into the existing water system and installing other items like pumps and backflow preventers.

The time it takes to install your system will depend on the complexity of the system, the size, and the type of terrain it needs to be installed in. You never pay to use Thumbtack: Get cost estimates, contact pros, and even book the job—all for no cost. Join as a pro. See all. Events and more. Other Info. Find a lawn sprinkler system installation company near you 2 near you. Zip code. Coverage square footage Less than sq. Greater than sq.

I'm not sure of the square footage. System type Manual system Timer-driven automatic system System recommended by professional. Good 3. In high demand. Patricia M. Did a wonderful job. Price was very reasonable and it took much less time than it would if I did it myself. View profile. Sosa's Landscaping. Very good 4. Offers remote services. Following the string, dig your trenches for your pipes, 6 to 12 inches deep. Nancy Foreman notes that one of the biggest mistakes people make, other than not placing the heads properly for percent coverage, is not digging the trenches deep enough.

If you have the trench too shallow damage can occur to the pipe and it can become exposed. You can make your life of filling the trench back in a lot easier by laying soil to one side and placing the sod to the other. You can rent a power trencher that makes digging the trenches a lot easier than by hand. To keep from digging up the entire lawn, you can use a pipe-puller to install the PVC piping.

Hook up your supply of water either by attaching to a spigot or tapping into your main water line. Attaching to a spigot is the easiest method of getting water to your sprinkler system and is suitable for those in a climate not experiencing extreme winters.

Hooking Up to a Spigot: When hooking up to a spigot, turn off the water supply going into the house and allow the spigot to drain. Remove the original spigot and replace with a galvanized or brass tee. Next, match the size of the outlets with faucet and irrigation pipe you are using. Hooking Up to The Main Water Line: Take the first step in hooking up to the main line by shutting off the water before the point in the line where you will be making a cut. For an above-ground connection, cut away a short section of pipe in the supply line just big enough for you to slide a slip tee into place.

Next, install a nipple into the stem of the tee fitting and finally connect the shut-off valve into that. Next, you want to install the valve manifold by digging a hole slighter bigger than the valve manifold box. Attach the main water supply line to one end of the valve manifold assembly, securing it by tightening the clamps. Now you need to run the PVC pipe. Lay your PVC pipe along the trenches and lay the appropriate sprinkler heads and connectors at each landscape flag or stake.

Starting at one sprinkler location, assemble all the parts together, other than the sprinkler head, and then move on to the next location and repeat the process. You want to flush any dirt or debris that made its way into the pipes before you install the sprinkler heads, as they can clog up.

Next, you will want to flush the system by turning the water back on. Manually open each valve and allow the water to flush the pipe and then close it, moving onto the next valve and repeating the process.

After you have flushed the system of any possible debris, you can now attach the sprinkler heads to the irrigation system. Make sure any pop-ups are flush with the soil line. Turn on the system, moving from one zone to the next and check the sprinkler heads and their spray patterns.